
Many self-built hotel networks adopt three independent systems: internet service running on AC and APs, voice service on PBX switches, and TV service on digital TV systems. These three sets of hardware require separate O&M with intertwined cables. The biggest concern during renovation is that misdisconnecting one cable will disrupt guest services. The AINOPOL all-optical renovation approach converges all three services onto one converged gateway. A single optoelectronic AP in each guest room delivers internet, TV and voice simultaneously, while reorganizing optical fibers and reusable Ethernet cables between floors and rooms.
Three independent networks mean separate operation and separate drawings, and faults pile up as time goes by.
Internet, TV and voice operate independently with dedicated cabling, separate drawings and divided responsibilities. In many guest rooms, aging telephone lines fail, forcing guests to go to the front desk for calls. Wi-Fi only supports 2.4G single band and becomes congested when the hotel is fully occupied. TV signals have noise, two remote controls are required, the TV launcher cannot be customized and screen casting is unavailable. Public Wi-Fi lacks real-name authentication and exportable logs, creating compliance risks that must be addressed during renovation.
Troubleshooting is highly difficult due to messy cabling. It is easier to replace a broken device than locate a faulty cable, and fault diagnosis often relies on guesswork. Before construction, engineers need to distinguish which existing links can be retained and which segments require new cabling. Unlike the "only replace end devices" scenario, renovation for such separated self-built triple networks follows a "replace + add" strategy.
To upgrade separated self-built triple networks, the strategy is replacement plus new deployment: legacy terminals are swapped out, and new optical fibers are laid from the core room to floors and guest rooms.

Items to be replaced: legacy AC controllers, old APs, set-top boxes requiring dual remotes, and outdated gateways without real-name authentication or seamless roaming.
Items to be added: converged gateway in the core computer room, new optical cables from core room to each floor, passive optical splitters or vOLT / OLT deployed in floor weak-current closets, fiber runs from floors to guest rooms, and one optoelectronic AP per room.
New cabling is required because old telephone and TV cables have degraded, and there is no reusable fiber foundation between the core equipment room and floors. Fiber to the room is mandatory to support dual-band roaming and local voice service.
This differs greatly from the "zero cable change" use case. Optical cables are deployed from core to floors and extended to each room. Verified usable legacy Ethernet cables can be kept. Old telephone and TV cables are not removed immediately; they are phased out gradually according to the cutover plan and reserved as rollback links.
Passive optical splitters require no power supply or heat dissipation. They are compact enough to fit inside weak-current boxes or be wall-mounted, replacing active aggregation switches on floors and reducing potential failure points. Splitting ratios and optical power ranges are validated through on-site surveys. If existing floor switches need to stay in service, vOLT modules can be installed to add PON access capability. Legacy switches can coexist with the POL architecture, allowing phased replacement by floor or service type.
All three services converge on the single converged gateway, unified under one topology drawing with centralized management responsibility.
The AINOPOL IP-POL Boundary-Free Solution reuses usable existing Ethernet cables, pre-deployed fibers and legacy data communication hardware, replacing only outdated components. New fiber runs operate in parallel with retained valid cables. After renovation, the unified topology diagram clearly marks all cable connections, eliminating guesswork when troubleshooting messy wiring.
Parallel operation of old and new networks plus phased cutover ensures normal hotel operation during the upgrade.
The site survey collects key information: cable types inside walls (fiber, Ethernet or copper), availability of cable trays for new cabling, power and air conditioning conditions in equipment rooms, room quantity and access points per floor, voice service status during WAN outages, construction windows and property management restrictions. The final plan is subject to on-site survey results.
Cutover schedules align with hotel business rhythms. Old and new networks run in parallel with staged migration. Modifications are arranged during low-occupancy periods while the hotel operates normally in daytime. Legacy cables and devices are reserved until project acceptance. Service can roll back to the original links immediately if abnormalities occur, and rollback workflows are documented in implementation files.
Once the optical foundation is deployed, future bandwidth upgrades are simple. Migration from GPON to XGS-PON, 50G PON and Wi‑Fi 7 optical APs mainly involves swapping end devices, while intermediate optical fibers and splitters stay unchanged.
To sum up, renovation for separated self-built hotel triple networks adopts the "replace + add" model: legacy terminals are replaced, new optical cables are laid from core room to floors and guest rooms, and usable old Ethernet cables are retained. Internet, TV and voice services are consolidated onto the AINOPOL converged gateway, with one optoelectronic AP serving each guest room. The finished project delivers clear topology, local survivable voice, real-name authentication and compliant log storage. The scope of retained and newly-added cabling is finalized based on on-site survey.
Q: Do we need to remove all three original networks at once?
A: No. Old telephone and TV cables are phased out gradually. Old and new networks run in parallel with phased cutover, and legacy cables and devices remain in place until acceptance. The new network is fully commissioned first before decommissioning old segments, ensuring normal daytime hotel service.
Q: Can legacy Ethernet cables be reused?
A: Legacy Ethernet cables passing field inspection can be kept and work alongside newly deployed optical fibers. Primary services run over fiber to rooms, while qualified old cables undertake appropriate auxiliary services. Reusability and reserved segments are subject to site survey and project design.
Q: Is the original PBX still required?
A: Voice service is hosted by the converged gateway and supports local internal calls independent of external internet. Whether the original PBX is retained or integrated depends on on-site business needs and will be confirmed in the project plan before construction.